Seestar with Router
https://www.cloudynights.com/forums/topic/962241-seestar-with-routerrepeaterrange-extender-wi-fi/==
USB power
TP-Link TL-WR3002X AX3000 可攜式路由器
Beryl AX（GL-MT3000 ) > 3000元
Slate Plus（GL-A1300） 價格比 Beryl AX 低
Mango（GL-MT300N-V2） 只有 2.4GHz
1800 內 只有 TP-Link TL-WR902AC
>2500 GL.iNet Opal GL-SFT1200
==
https://www.facebook.com/photo/?fbid=10161147932003114&set=gm.363859879759634&idorvanity=201735739305383
Seestar Wifi Range Extender
Hardware- Yeti 200X battery, TpLink model RE315
=> TpLink model RE315 這吃 110v .
https://www.youtube.com/watch?v=3K2ZvW4tpkQ1. Connect the new Range Extender to your home wifi network
using the WPS button on your Router and the Extender (2.4G and 5G). Other methods are in the instructions.
2. Plug the Range Extender into the AC outlet of a battery pack to power both the Seestar and the Range Extender.
3. Connect the Seestar Station Mode connection to the Range Extender. The correct connection will be, for example, 5G_EXT which is the signal from the extender. The extender will then connect Seestar to your router at a longer range.
Away From Your Home Wifi Network
1. Reset the Range Extender.
2. Download the Tether app from your app store.
3. Setup an account, etc. and connect the Range Extender
to the Seestar SSID (S50_xxxxxxx). Turn off Station Mode.
4. Connect your phone/tablet to the extended Seestar signal with the -EXT at the end.
Because the extender has antennas and could be attached to a high pole via an extension cord, the range to control the Seestar is much longer.
The important item is to connect Seestar to the Range Extender, then connect to your device to the _EXT wifi signal
==
https://youtu.be/r470tMjq3A8?si=OnoQt8nJLNAaGwQi就同一個wifi 網路上，可直接其他處控制
Station Mode（你說的這個）
Seestar 連上你家 / 戶外的 Wi-Fi Router 手機也連同一個網路
✅ 好處：
可以在同一個區網遠距離控制（整個家、甚至跨樓層）, 訊號穩定很多 , 不用一直切 Wi-Fi
可以多人同時查看（視設定）
=> 手機跟 Seestar 要連同一個 router
首次設定還是要直連 , 一開始要先用手機連 Seestar 熱點 再在 App 裡設定 Wi-Fi
有些 router 會讓 IP 改變 偶爾會需要重新搜尋設備
USB 給電 router
GL.iNet GL-MT3000 Beryl AX
GL.iNet Mango GL-MT300N-V2
==
Station mode
Connecting to Station Mode
(with thanks to Bob Waterfield, Jeff Struve, and Ying Tang)
1. If you turn on “Station Mode” and your home WiFi networks are NOT displayed
2. Turn off “Station Mode”
3. Click on “Frequency”
4. If you are connected to 2.4G, click on 5G (if you are connected to 5G, click on 2.4G)
5. Turn on “Station Mode”
6. Select the home WiFi network displayed that you want to connect to. You should now be connected in "Station Mode"
7. When you turn off Seestar, the next time you turn on Seestar it will automatically reconnect in "Station Mode" via that same home WiFi network.
8. To connect directly through your phone again (and not through your home WiFi network), Turn off “Station Mode”
https://www.facebook.com/photo/?fbid=10231092737956713&set=gm.534083682737252&idorvanity=201735739305383https://www.facebook.com/photo.php?fbid=10234630197918812&set=p.10234630197918812&type=3
==
seestar 一般模式（AP Mode / 熱點模式）
Seestar 自己發 Wi-Fi , 手機直接連它
❗ 缺點： 距離很短（通常幾公尺～十幾公尺） , 一旦離開就斷線無法遠端控制
觀星論壇 
