建議你再下載一次，再更新幾次，或許就會正常了。
更新時要小心，電池最好充飽電，NB也接上變壓器或是電池也充飽，不要做其它的事，
讓它專心的做更新的動作這樣比較保險些。平常容易當機的電腦也不要拿來作更新的動
作，一當機的話就完蛋了....。
然後那個零點幾倍導星速率的玄機，可能是你連線後，用IE打入STARBOOK的IP，看除
了加慧星資料外，是否還有可以調整導星速率的選項。
另外，那個ASCOM DRIVER當中，那個2X SIDEREAL TIME
http://enzerink.net/peter/astronomy/images/Sphinx%20Driver.png我看這個圖是調成12X，所以你可以試試看除了2X以外的選項就知道了。
還有那一個SOFT ERROR選項，你也試試看有什麼差別。
試本來就需要一些時間，只是這一台比較怪胎一點，要多花一些時間去試。
有人試成功了，但是是用guide dog軟體，這個ascom driver好像用phd guiding有問題的樣子，
所以改軟體吧！
到以下網站下載：
http://barkosoftware.com/GuideDog/Download.html那邊也有手冊，可以下載來研究，其實並不難。
那個ascom 的driver原本就是設計給guide dog用的，
因為它那個guide rate 設為2Xsidereal time，擺明是guidedog的設定
RA/Dec Guide Rate:
This is the guide rate of the mount to be guided in arcseconds per second.
Enter the value for your mount.
For mounts listed as 2x sidereal, enter a value of 15. The value entered does not actually change the rate of the mount. The value is just used to calculate the time needed for corrections. You can adjust these numbers up or down to tune to your particular drive. Sma
星星工廠那邊也有和同好討論過一陣子，所以你可以去爬文找一下。
這一套通之後，大概所有的自動導星軟體就全通了，所以值得好好研究一下。
Also, I did my first autoguiding tests this past weekend.
I used GuideDog with
my SCII as the guide camera for a DSLR. I use a WO SD66 as a guide scope. I was
pleasantly surprised with how well the setup actually worked.
Peter's ASCOM
driver for the Sphinx worked great with GuideDog (I need to send him a
donation).
I also tried
PHD Guiding, but it's calibration took a long time and then it
would not hold the guide star when I changed targets. Guide Dog seems easier to
adjust as well as being a decent match without fiddling with lots of parameters.I took this shot of M7, but I had misplaced a cable (at 2 AM :-) and could not
connect my DSLR to my focus aid on the computer. I guessed focus thru the
viewfinder and missed slightly, so the shot isn't very good:
另外杜甫森式不接延焦管就可以看的話，通常就對不到數位相機的直焦了；反之可以對得
到直焦的，通常看就得加延焦管。
觀星論壇 
