信達的 azGTi MOUNT 開箱

[peter]

==

https://www.youtube.com/watch?v=swr1Ssc1ehE
AZ GTi goto wifi mount
https://www.cloudynights.com/topic/586532-new-skywatcher-az-gti-goto-wifi-mount/page-32

[peter]

https://www.cloudynights.com/topic/631581-sky-watcher-az-gti-mount-counterweight/

[peter]

https://www.cloudynights.com/topic/658474-skywatcher-synscanaz-gti-alignment-instructions/

[peter]

more

https://www.cloudynights.com/topic/644643-az-gti-first-light-and-impressions/


==
https://www.cloudynights.com/topic/586532-new-skywatcher-az-gti-goto-wifi-mount/page-33
In AZ Mode:

  Save a Terrestrial User Object with Axis1=0, Axis2=0  (this represents North/Level)

  Slew (Goto) this saved position, with tight clutches.  Your encoders are now at (0, 0) North/Level

  Loosen both clutches and move your MOUNT so that your OPTICS are pointing North/Level.  Re-tighten your clutches.  Now your mount and encoders are in sync.

    Be mindful of your dovetail orientation, specifically if using an L-Bracket, or any other right-angle type of mounting to your optics, as this might change the direction your optics are pointing relative to the direction the mount is pointing.  (your optics may be parallel, or perpendicular to the mounts dovetail)  (scopes are often parallel, DSLR's are often perpendicular).

 

In EQ Mode:

  Save a Terrestrial User Object with Axis1= -90, Axis2= 90 (this represents EQ Home)

  Slew (Goto) this saved position, with tight clutches.

  Loosen both clutches and move your MOUNT so that your OPTICS are pointing at the NCP (near Polaris).  Re-tighten your clutches.

 
 

[peter]

信達的 azGTi MOUNT   開箱

手機 WIFI 得先選到  synScan or Pro  連上是  altaz mode  .  目前還不知道 如何切到EQ MODE
 下面數字是速度 可以  左右調,  9 是最快速 .

Pro  在ALIGN 上多了一些 ,   還有些PEC   應該是給信達赤到儀用連POLAR SCOPE 燈都能控制 .  
 
https://stargazerslounge.com/topic/336866-azgti-in-eq-mode/

難到得刷FIRMWARE  ??

http://skywatcher.com/download/software/motor-control-firmware/


==

PDF
http://www.xdwyj.com/DriveList.aspx

DRIVER
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41

从以下网址下载 SynScan Pro 的 ASCOM 驱动软件包：
https://inter-static.skywatcher.com/downloads/setup_synscan_app_ascom_driver_version_122.exe


http://bbs.imufu.cn/forum.php?mod=viewthread&tid=788171
 =>英文官网1.17版本的更新，这个更新可以使用赤道仪模式




https://stargazerslounge.com/topic/326241-azgti-firmware-updating-with-a-mac/
https://www.cloudynights.com/topic/673168-how-to-update-skywatcher-azgti/

[peter]

http://bbs.imufu.cn/thread-782687-1-1.html


https://youtu.be/By6mBcMspGQ

[peter]

https://stargazerslounge.com/topic/305296-sw-az-gti-mount-firmware-update/


 This application is used to update the motor controller's firmware of a Skywatcher telescope mount, which has a build-in Wi-Fi module or an external SynScan Wi-Fi dongle.
1. Disconnect the ethernet cable from your PC.
2. Let you PC join the Wi-Fi network provided by the mount's build-in Wi-Fi or an external SynScan Wi-Fi dongle.
3. Run MCFirmwareLoader_WiFi.exe
4. Use the "Browse" button to load the new firmware file (*.MCF) for the mount's motor controller.
5. Click "MC Version" button to check the version of the motor controller; or,
   click the "Update" button to load the new firmware to the motor controller.
6. Re-try if the updating fails.

[peter]

原來得刷 az_eq 那個MCF  FILE
 
1.  motor_controller_fimrware_loader_-_wifi_version_174.zip
2. select MCF  FILE 
  => azgti_motor_controller_firmware_rightarm_0320.zip

3.  要先問馬達版本  

 但一開始 NOTEBOOK  用WIFI  連有連上  , 看MC  VERSION  說認不得..結果突然  AZGTI 認不到  只看 wifi 上有  synScan  .. 手機一直連說沒有  NP DEVICE  .. 以為要返廠
  才剛拿到阿 ..

後來看  MCF  WIFI 更新說要TRY  就算FAIL .  還是要 TRY UPDATE ..
再用 NOTEBOOK  在連 ..在問VERSION ,    一樣說不知道 版本  但READY  ,   就UPDATE   反正死馬當活馬.. 突發現 電腦開始 UPDATE MCU ,   更新算快 . 一下完後, 說重開 AZGTI  ,  
手機重連  , 重新看到AZGI  那WIFI  NAME   synscan_xxxx 感覺可能會回來,  一連上果然出現  AZ  跟EQ  兩個 MODE ..

真的好險阿。

[peter]

LINK

https://www.cloudynights.com/topic/661513-skywatcher-az-gti-useful-links-and-accessories/

https://www.cloudynights.com/topic/606922-mounts-for-the-minimalist-in-you/





這邊右邊圖跟左邊不同?

  不知道那個是對 ??

[peter]

設計 有問題  ,   台灣角度無法 對 ,  我有 sky tracker pro .. 可以用這微調
但是 AZGTI  極望向不同 , 高緯度可 ,  但是 , 台灣 23度無法 使用   會卡到  ,

兩邊都調過全都會卡到.  

star Party 對過  比POLARIS 角度高太多 . 今天又測一次 , 果然設計 不能給台灣用 ,

[peter]

GRUS  回信

看來是  90-60  = 30 度

緯度30 度以下無法使用

[peter]

CUBE PRO  WEDGE 是M8 

SA  的底不知道 角度能多大?? 

[peter]

cube pro wedge  可用  剛好 M8  可拆下換 3/8  螺絲

但是 ..  會卡極望   轉動 要小心 .. 這設計不好 應該離更遠些吧
 另外  下面左右微調也會被本體卡到  很難調 . 

[peter]

今天發生  GOTO 方向跑錯邊.  1 star align  SIRIUS   仰角類似 差不多 但左右顛倒?   明明SIRIUS  東邊剛起來 ,  卻跑去指向西邊
  APP 看UTC  時間跟台灣  差 8HR  也對阿 .   難到裝反? 



感覺 AZGTI   也沒地方數經偉度難到知道 手機上資料 ?
 

不過 單看EQ MODE  TRACKING
 500d (apsc) +   135MM  ISO=100  單張 118 sec  and  58sec  參宿4  跟  Sirius   ZOOM IN
 感覺  60SEC 可以 , 但 2MIN 會小拖,  沒上重鎚.. 外掛極軸位置不好抓  .

M42 老鏡問題嗎?  右下都有小點?  

[peter]

https://www.youtube.com/watch?v=CcXyG9fDhlQ