信達的 azGTi MOUNT 開箱

(1/12) > >>

peter:


==

https://www.youtube.com/watch?v=swr1Ssc1ehE
AZ GTi goto wifi mount
https://www.cloudynights.com/topic/586532-new-skywatcher-az-gti-goto-wifi-mount/page-32

peter:
https://www.cloudynights.com/topic/631581-sky-watcher-az-gti-mount-counterweight/

peter:
https://www.cloudynights.com/topic/658474-skywatcher-synscanaz-gti-alignment-instructions/

peter:
more

https://www.cloudynights.com/topic/644643-az-gti-first-light-and-impressions/


==
https://www.cloudynights.com/topic/586532-new-skywatcher-az-gti-goto-wifi-mount/page-33
In AZ Mode:

  Save a Terrestrial User Object with Axis1=0, Axis2=0  (this represents North/Level)

  Slew (Goto) this saved position, with tight clutches.  Your encoders are now at (0, 0) North/Level

  Loosen both clutches and move your MOUNT so that your OPTICS are pointing North/Level.  Re-tighten your clutches.  Now your mount and encoders are in sync.

    Be mindful of your dovetail orientation, specifically if using an L-Bracket, or any other right-angle type of mounting to your optics, as this might change the direction your optics are pointing relative to the direction the mount is pointing.  (your optics may be parallel, or perpendicular to the mounts dovetail)  (scopes are often parallel, DSLR's are often perpendicular).

 

In EQ Mode:

  Save a Terrestrial User Object with Axis1= -90, Axis2= 90 (this represents EQ Home)

  Slew (Goto) this saved position, with tight clutches.

  Loosen both clutches and move your MOUNT so that your OPTICS are pointing at the NCP (near Polaris).  Re-tighten your clutches.

 
 

peter:
信達的 azGTi MOUNT   開箱

手機 WIFI 得先選到  synScan or Pro  連上是  altaz mode  .  目前還不知道 如何切到EQ MODE
 下面數字是速度 可以  左右調,  9 是最快速 .

Pro  在ALIGN 上多了一些 ,   還有些PEC   應該是給信達赤到儀用連POLAR SCOPE 燈都能控制 .  
 
https://stargazerslounge.com/topic/336866-azgti-in-eq-mode/

難到得刷FIRMWARE  ??

http://skywatcher.com/download/software/motor-control-firmware/


==

PDF
http://www.xdwyj.com/DriveList.aspx

DRIVER
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41

从以下网址下载 SynScan Pro 的 ASCOM 驱动软件包：
https://inter-static.skywatcher.com/downloads/setup_synscan_app_ascom_driver_version_122.exe


http://bbs.imufu.cn/forum.php?mod=viewthread&tid=788171
 =>英文官网1.17版本的更新，这个更新可以使用赤道仪模式




https://stargazerslounge.com/topic/326241-azgti-firmware-updating-with-a-mac/
https://www.cloudynights.com/topic/673168-how-to-update-skywatcher-azgti/

導覽

[0] 文章列表

[#] 下一頁