Asiair Pro

 Asiair  
 Asiair PRO
 Asiair PLUS  第三代  

中國叫  ZWO 振旺盒子

https://joeytroy.com/asiair-pro-vs-asiair-plus/


ASIAir Pro Micro SD Card:
Sequential read 1000M/B 46.370
Sequential write 1000M/B 19.725

ASIAir Plus onboard eMMC:
Sequential read 1000M/B 135.821
Sequential write 1000M/B 135.107



ASIAir Pro Internals

If you have kept up with me on CloudyNights I have done a pretty deep dive into the Pro, which included rooting the device and digging deep into the covers. The ASIAir Pro is a Raspberry Pi 4 with 4GB of RAM and has a proprietary 5v power unit that powers your Astro devices built by ZWO. The Pro is running a 32bit version of Raspbian GNU/Linux 10 (buster). The operating system is loaded onto a 32GB Scandisk Ultra MicroSD Card. Here are the internal pictures of the ASIAir Pro when I cracked it open.

 Asiair PLUS
https://www.facebook.com/photo/?fbid=5391034717649224&set=pcb.5391035450982484

https://www.facebook.com/photo?fbid=5391034937649202&set=pcb.5391035450982484

肉叔  asiair  對極軸 

ASIAIR PLUS 經驗分享

https://www.youtube.com/watch?v=Is8ZdfVqR5I

進化到 smart Telescope
https://familystar.org.tw/index.php?option=com_smf&Itemid=45&topic=37562.0
 

Asiair pro +cem25ec 碰到怪事
 https://familystar.org.tw/index.php?option=com_smf&Itemid=45&topic=37895.msg259924#msg259924

後來確認問題了 cem25ec 先前  align 後 資料 有 offset 存在  重開機還有記 ,  導致  asiair  goto 過去 偏差好多度 .
  這超過 air (聽說 可設 range ? )  顯示 也離目標好多分 差  .  所以 無法居中 . 
前些天把 手把 校正  清除 goto jupiter OK .   goto 過去  目標  跟現在座標也 都對了 .   
 昨晚又 測 m31  m42  ic434  m33  全都能居中 .. 先前 一值困擾好久 .終於解決了.

剩下 就 asiair  對 polar align  .. 還是怪怪的