|
主題: Skywatcher Handcontroller Update 作者: Tom 於 2016-12-08 23:04:10 There is now version 3.39.03 and 4.39.03 for Skywatcher Handcontrollers available
================================================================ Release Note - SynScan Firmware: ---------------------------------------------------------------- This new SynScan Hand Controller firmware release is an update from the previous SynScan Firmware Version 03.38.09. What's new in this update? 1. A "Solar Track Mode" is added in the UTILITY menu. To use this new function: 1) Polar align the equatorial mount or level the base of the Alt-Az mount. 2) Finish the initialization on SynScan. No alignment is needed. 3) Activate "Solar Track Mode." Now the mount will start working at solar tracking speed until exiting the "Solar Track Mode". 4) Center the Sun in FOV with SynScan hand controller. 5) Start observing. Warning: Your telescope must be capable of observing the Sun safely. 2. Optimize the procedure of restoring from Parking. 3. Fix minor bugs. Download: http://ca.skywatcher.com/_english/05_service/01_download.php Cheers Tom 主題: 回覆： Skywatcher Handcontroller Update 作者: Tom 於 2017-08-30 16:52:45 There is now version 3.39.05 and 4.39.05 for Skywatcher Handcontrollers available
================================================================ Release Note - SynScan Ver.03.39.05 and Ver.04.39.05 Firmware: ---------------------------------------------------------------- Copyright @ 2016 - 2020 Sky-Watcher Telescope Please note that "SynScan" is a registered trade mark of Sky-Watcher Telescope. ---------------------------------------------------------------- This new SynScan Hand Controller firmware release is an update from the previous SynScan Firmware Version 03.39.03 and 04.39.05 What's new in this update? 1. Update and correct the Solar Tracking speed in the Solar Track Mode. The Solar Track Mode is a new fuction to track the Sun and does not need an alignment. 2. To use this Solar Track Mode function: 1) Polar align the equatorial mount or level the base of the Alt-Az mount. 2) Finish the initialization on SynScan. No alignment is needed. 3) Activate "Solar Track Mode." Now the mount will start working at solar tracking speed until exiting the "Solar Track Mode". 4) Center the Sun in FOV with SynScan hand controller. 5) Start observing. Warning: Your telescope must be capable of observing the Sun safely. 3. Fix minor bugs. Download: SynScan V3 Hand Controller Firmware: http://www.skywatcher.com/download/software/synscan-v3-hand-controller-firmware/ SynScan V4 Hand Controller Firmware: http://www.skywatcher.com/download/software/synscan-v4-hand-controller-firmware/ Cheers Tom |